Advantages of Surrounded Laser Cutting Machine
1. Prevent laser damage to people's eyes
In the international classification of lasers, the lasers that can be used for cutting generally belong to Class III or Class IV lasers. Not only is it forbidden to look directly, but the power of its scattered light should not be underestimated. Novices generally like to stare at the cutting head when operating a laser cutting machine, which will cause damage to the eyes and a tingling sensation for a long time. In addition, the laser has good monochromaticity, and the chromatic aberration in the fundus is small. Very low laser energy irradiation can cause damage to the cornea or retina.
The laser cutting machine
with the enclosed structure can isolate the laser from the operator to the greatest extent. After the parameters are adjusted and the cutting sample reaches the standard, the side sliding door of the cutting machine can be closed to perform fully enclosed cutting to avoid the damage caused by the laser to the human body.
2. Prevent smoke and dust from harming people
Laser cutting is thermal cutting, and a lot of smoke and dust will be generated during the cutting process. Although laser cutting machines
are generally equipped with dust extraction devices, some smoke and dust will inevitably escape, causing pollution to the working environment. The enclosed laser cutting machine
adopts a closed structure, and the smoke and dust generated during cutting are internally filtered, so that the escaped smoke and dust are negligible or even negligible.
3. Prevent mechanical damage
Although the laser cutting machine uses a laser instead of a blade as a processing tool, the probability of causing mechanical damage has been greatly reduced, but it is still not 100% guaranteed that there will be no accidents. The surrounding laser cutting machine
completely isolates the processing structure, processing material, conduction device, etc. from the operator, which minimizes the risk of possible accidents.
4. Even if there are many advantages, when operating the surrounding laser cutting machine
, it is necessary to strictly abide by various specifications, such as wearing goggles, dust masks, gloves, etc.