Details that need to be paid attention to when the 3D Five-axis Waterjet Cutting Machine
The 3D Five-axis Waterjet Cutting Machine is suitable for cutting natural stone and metal materials, as well as other materials such as glass and steel plate.
1. Cut products to avoid cutting out of position
Before using water jet cutting, it is necessary to confirm whether there are any obstructions, and at the same time, carefully check whether the water pressure and air pressure have reached the predetermined standard. The product can be cut when the predetermined standards and requirements are met, but it should be noted that when cutting the product, the cutting position must be avoided. Only when the product is adsorbed in place can errors caused by the position be avoided.
2. Ensure that the cutting workpiece is complete to avoid damage to the sand pipe
Water jet cutting uses water as a medium and obtains huge energy through a high-pressure generating device, and then a feeding and mixing device adds abrasives to the high-pressure water jet to achieve workpiece surface materials and decorative processing. However, during the waterjet cutting operation, it is necessary to ensure that the cutting workpiece is complete, in order to avoid damage to the sand pipe or other accidents.
3. Pay attention to the working and sealing condition of the supercharger and high-pressure pipe of the water jet
The analysis shows that in the actual operation process of water jet cutting, attention must be paid to the on-off and off conditions of high-pressure water, and at the same time, attention must be paid to the working sealing conditions of the water-jet supercharger and high-pressure pipe. Especially in the event of an emergency power failure, the high-pressure water may stay in the high-pressure system, so it is necessary to pay attention to its pressurization to avoid the residual high-pressure water spraying out.
4. Water jet cutting combines the advantages of water jet processing, which is one of the important reasons why those high-quality ceramic tile 3D Five-axis Waterjet Cutting Machine
are praised. In addition to the need to pay attention to avoid cutting products when operating the 3D Five-axis Waterjet Cutting Machine
. , It is also necessary to ensure that the cutting workpiece is complete to avoid damage to the sand pipe, and it is also necessary to pay attention to the working sealing condition of the water jet supercharger and high pressure pipe.