Water knife cutting is one of the latest trends in the ceramic tile product manufacturing industry.You can cut the tiles into different shapes, while paying attention to every detail.Everything from complex corners to small holes can be handled with a water knife.You can make the most of your tiles as water knife cutting does not cause waste.Thin cut cuts are another reason for choosing water knives to cut tiles.Therefore, you can rely on water knife cutting to simplify your tile making project.For any tile cutting purpose, you can choose a water knife.
|Type:||gantry cutting table|
|Size (MM):||3900 * 3050|
|Maximum cut range (MM):||X=3000mm Y=2000mm|
|Control accuracy:||± 0.01mm|
|Cutting accuracy:||± 0.1mm|
|Repositioning accuracy:||± 0.025mm / m|
Y to double support, two-way ball wire rod, straight guide rail drive, to ensure the operation speed and accuracy of the cutting head.
Unique automatic lubrication system with high quality drag chains and special mobile cables, durable.
Pump —— Let's start with the foundation, high pressure pump.Each water knife cutter requires a high pressure pump capable of pumping water at a very high speed.The common water knife cutter uses 480 V, 3 phase, 100 A, 60 Hz pumps.High pressure pump is the core of the water knife cutter.It is responsible for pressurizing the current and continuously through the mixing tube.At this point, the supersonic flow of the water jet emerges from the gem-embedded aperture to the carbon fiber surface.We can find two pumps in the water knife carbon fiber cutter, directly driven and supercharger based.Most carbon fiber water knife cutters use a based enhancers.
Cutting head The cutting head of the —— water knife is elongated designed objects with high tolerance values.It helps in cutting at right angles.
Control system —— If the high pressure pump is the heart, then the control system is the brain of the water knife carbon fiber cutter.We use the control system to manipulate and perform all the cutting operations.It contains motion control and nozzle positioning that provides the highest accuracy when cutting carbon fiber.
Cutting table The —— cutting table is a solid device that helps cut carbon fiber.It is equipped with a powder coating.Replacement galvanized metal strips are used to extend their service life.
The automatic feed system water knife cutter requires a continuous abrasive flow to continue the cutting process.This is true for the automatic feeding system.It fills the abrasive container where the pressure system is located.The system delivers the abrasive to the cutter.
CE, ISO: 9001 certification
We will provide you with the packaging of the equipment and the shipping to the designated port.The customer service staff at Witt Services will give you the most timely telephone maintenance support and technical problem guidance
Water jet tile cutting is the best choice for people who need a targeted cutting process.When you start the cutting process, high pressure water can flow from the nozzle.The orifice produces a consistent water flow.The right amount of abrasive reaches the current and, therefore, the water gains the ability to cut the tiles.You must mark the size for the nozzle.It will help you to make the tile cutting process successful.
One of the most important factors for ceramic tile manufacturers is edge quality.You can get the best quality tile edge by spraying water.Your tile does not need secondary finishes.In addition, water knife cutting is a combination of appropriate speed, abrasive flow rate, and pressure.The manufacturer found the unburrous edges in the incision.
By mixing high pressure wear with water, you can create narrow water flows.You can cut any tiles of any thickness level.You can use abrasive water jet cutting processes to produce different curves, inner holes, and straight line cutting.