Water knives have become the most commonly used option for cutting paper.While abrasive water knives are effective in cutting harder materials, pure water knives are perfect for cutting paper.You can use water knives to cut thin paper and thick paper.Since it is a fine water flow, your paper does not absorb it.Therefore, you need not worry about the integrity of paper materials when using a water knife.
|Type:||gantry cutting table|
|Size (MM):||3900 * 3050|
|Maximum cut range (MM):||X=3000mm Y=2000mm|
|Control accuracy:||± 0.01mm|
|Cutting accuracy:||± 0.1mm|
|Repositioning accuracy:||± 0.025mm / m|
The water knife cutting system is one of the oldest cutting techniques the paper company has been using for decades.In fact, in some cases, water knife technology can cut hardened materials such as glass metal or even stone.Pure water jet technology is used to cut food and paper.A fine, clean water jet does not cause any confusion when cutting the paper.Since it uses cold cutting technology, any absorption of the paper is avoided.The technique avoids the production of thermal impact regions while providing precise cutting.It completely maintains the integrity of the paper.No doubt the efficiency of the technology and machine helps paper makers.
Pump —— Let's start with the foundation, high pressure pump.EachWaterjet paper cutter requires a high pressure pump capable of pumping water at a very high speed.The commonWaterjet paper cutter uses 480 V, 3 phase, 100 A, 60 Hz pumps.High pressure pump is the core of theWaterjet paper cutter.It is responsible for pressurizing the current and continuously through the mixing tube.At this point, the supersonic flow of the water jet emerges from the gem-embedded aperture to the acrylic surface.We can find two pumps in the water knife paper cutter, directly driven and supercharger based.Most water knife paper cutters use a based enhancers.
Cutting head The cutting head of the —— water knife is elongated designed objects with high tolerance values.It helps in cutting at right angles.
Control system —— If a high-pressure pump is the heart, then the control system is the brain of the water knife.We use the control system to manipulate and perform all the cutting operations.It contains motion control and nozzle positioning that provides the highest accuracy when cutting the acrylic.
Cutting table The —— cutting table is a solid device that helps with the paper.It is equipped with a powder coating.Replacement galvanized metal strips are used to extend their service life.
The automatic feed systemWaterjet paper cutter requires a continuous abrasive flow to continue the cutting process.This is true for the automatic feeding system.It fills the abrasive container where the pressure system is located.The system delivers the abrasive material to the cutter.
CE, ISO: 9001 certification
We will provide you with the packaging of the equipment and the shipping to the designated port.The customer service staff at Witt Services will give you the most timely telephone maintenance support and technical problem guidance.