Wood processing is one of the most common scenarios in manufacturing.In particular, highly engineered timber is widely used and can be used in different fields.Engineered wood is better than natural wood because of its special properties and can be used perfectly used for different purposes.You can find high density, high strength, and custom thickness in the engineered wood pieces.However, the way you cut the wood will have an impact on the product made.Everything from plywood to veneer can be treated with a water knife.Simple free form cutting, narrow cutting, non-fragmentation and quick set time —— these are some of the reasons for choosing water jet wood cutters to cut wood.
|Type:||gantry cutting table|
|Size (MM):||3900 * 3050|
|Maximum cut range (MM):||X=3000mm Y=2000mm|
|Control accuracy:||± 0.01mm|
|Cutting accuracy:||± 0.1mm|
|Repositioning accuracy:||± 0.025mm / m|
save both time and labour
Precise cutting and high precision
Cold cutting process
Environmental protection without dust
Do not absorb water
Pump —— Let's start with the foundation, high pressure pump.Each water knife cutter requires a high pressure pump capable of pumping water at a very high speed.The common water knife cutter uses 480 V, 3 phase, 100 A, 60 Hz pumps.High pressure pump is the core of the water knife cutter.It is responsible for pressurizing the current and continuously through the mixing tube.At this point, the supersonic flow of the water jet emerges from the gem-embedded aperture to the wood surface.We can find two pumps in water jet wood cutters, directly driven and supercharger based.Most water jet wood cutters use enhancers.
Cutting head The cutting head of the —— water knife is elongated designed objects with high tolerance values.It helps in cutting at right angles.
Control system —— If a high pressure pump is the heart, then the control system is the brain of a water jet wood cutter.We use the control system to manipulate and perform all the cutting operations.It contains motion control and nozzle positioning, providing the highest accuracy when cutting wood.
Cutting table The —— cutting table is a solid device that helps cut acrylic.It is equipped with a powder coating.Replacement galvanized metal strips are used to extend their service life.
The automatic feed system water knife cutter requires a continuous abrasive flow to continue the cutting process.This is true for the automatic feeding system.It fills the abrasive container where the pressure system is located.The system delivers the abrasive to the cutter.
CE, ISO: 9001 certification
We will provide you with the packaging of the equipment and the shipping to the designated port.The customer service staff at Witt Services will give you the most timely telephone maintenance support and technical problem guidance.